Binary firmware for the HP 246 G6 notebook on Quanta board DA0P1GMB6D0, with 084D6 in the name. That code is likely the HP system board identifier, though this is not certain. Quanta uses the DA0 prefix with a code name and revision suffix, so verify the full number printed on the board. The 8 MB size matches an 8 MB SPI flash chip. Read and store the original chip contents with your programmer before writing this image, then verify the write.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive2dollarpaypal. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →