Firmware for the HP 280 Pro G6 microtower desktop on a board named KENT, revision 1.0, for 10th-generation Intel Core i5 processors. It is sized for a 16MB flash chip and marked as tested. The rar is 28.2 MB, so it likely holds more than one file. Before writing it with an SPI programmer, confirm the board revision, save the original chip contents and check the image is exactly 16 MB. It is used to recover a desktop that powers on without video or shows corrupted firmware.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @jdbiosworld. Enginerys does not host this file.
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →