BIOS image for the HP 282 Pro G4 desktop, Lincs board, Wistron number 17514-1 at revision A, with board code 348.0A817.0011, prepared for a system with an Intel Core i3-8100 processor and a 16 MB flash chip. The archive is 10.7 MB. It is used to restore the firmware by programming the SPI chip directly when the PC fails to boot. Wistron uses this five-digit numbering. Check the PCB number and revision, back up the existing contents and confirm the chip is 16 MB before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 28 Nov 2022 | Open file on RM Schematics |
| @Laptopbiossolutions | 20 Sept 2023 | Open file on RM Schematics |
| @Laptopbiossolutions | 20 Sept 2023 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →