Main BIOS image for the HP 430 laptop, Core i3 version, tagged display, which typically marks the system BIOS file used to cure no-video faults. The binary is 4.00 MB and fits a 32 Mbit SPI flash chip. It complements a 512 KB power file for the same model. Use an SPI programmer to rewrite the chip when the laptop powers up with a blank screen. No board number is given, so check the motherboard marking first and keep a copy of the original chip contents.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptop. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →