Power-labelled firmware dump for an HP 430 notebook with an Intel Core i3. At 512 KB it belongs to a small dedicated flash chip, likely holding EC or keyboard controller code that controls power-on, though the name does not say so explicitly. A matching display image for the main BIOS exists for the same model. Flash it when the board shows no power response and the small chip is suspected corrupt. Confirm the chip capacity and board number on the PCB, and back up before programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptop. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →