BIOS dump for the HP ProBook 450 G1, board number 12241-1 from the Rampage project, as a raw 8 MB .bin file. The five-digit dash-revision pattern is used by Wistron, the ODM behind this HP board. Technicians write such images to the SPI flash with an external programmer when firmware is corrupted or the laptop is stuck at a black screen. Before flashing, read and keep the existing chip contents, confirm the chip holds 8 MB, and check that 12241-1 matches the label on the PCB.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @afssolutions. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @afssolutions | 21 Apr 2022 | Open file on RM Schematics |
| @bioshub | 6 Sept 2022 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 6 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →