BIOS archive for the HP ProBook 450 G3 on Quanta board DA0X63MB6H1, revision H, holding a 16 MB image reported as working. Quanta boards are recognised by the DA0 prefix followed by the project code, here X63. The file is used to reflash the SPI chip with a programmer when a board fails to post or shows firmware corruption. Confirm the board revision, check that the flash chip is 16 MB, and back up the existing contents before writing so machine-specific data can be restored.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 20 Aug 2025 | Open file on RM Schematics |
| @schematics_board_view | 21 Aug 2025 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →