BIOS dump for the HP 630 laptop with the Intel Management Engine region cleaned, supplied as a 4 MB raw binary. A cleaned ME region lets the firmware rebuild its ME settings on first boot, which helps cure post-flash problems such as slow fan, shutdowns or a missing display. The file is written straight to a 32 Mbit SPI chip using a hardware programmer. Back up the original chip first so serial and board data can be restored, and confirm the chip on your board is 4 MB before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bioshub. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →