Third copy of a firmware dump for the HP 6460b, motherboard 6050A2398701 revision A02, with CN17 in the name and a working OK status. Inventec uses the 6050A prefix for its boards. The 4.00 MB binary corresponds to a 32 Mbit flash chip and is usually written with a CH341A or similar SPI programmer to fix a no-boot fault. Back up the original chip, because it holds the serial and system data, and confirm the revision before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfilebins. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →