BIOS image for the HP Compaq Pro 6305 desktop, stored as a raw 8.00 MB binary. The name gives no board number, BIOS version or revision, so confirm the system board and flash chip before use. A dump like this is normally written to the SPI flash with a hardware programmer such as a CH341A when the machine fails to POST after a corrupted update. Read and save the original chip contents first, verify that the chip capacity matches the 8 MB image, and run a verify pass after writing to confirm the flash took correctly.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @ComputerBIOSBinFile. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →