BIOS image for the HP Compaq CQ41-208AU, marked New, as a 2.00 MB raw binary. The AU suffix usually indicates an AMD-based configuration, so it must not be mixed with Intel CQ41 boards. A 2 MB dump suits a 16 Mbit SPI flash chip. Flash it with an external programmer to restore a board that fails to start after corruption. Back up the original contents first, check the motherboard number on the PCB matches your source, and confirm the chip capacity before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →