Raw 16 MB BIOS dump for an HP notebook using the Quanta-made DA0P5HMB8J0 mainboard, revision J, marked OK by the person who read it, meaning it was taken from or tested on a working unit. DA0 prefixed numbers follow the Quanta pattern, where the letters after DA0 identify the project and MB the motherboard. The .bin file is written directly to the SPI flash with a hardware programmer. Check that the board revision matches, back up the existing chip, and note that serial and product data from the donor may need re-entry afterwards.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptopomi. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →