HP dv6-3040er (Quanta LX6) - KB3926QF D2 (W25X40BV)

BIOS .bin 512 KB Shared

EC firmware for the HP dv6-3040er built on the Quanta LX6 board, for the ENE KB3926QF D2 controller, which stores its code in an external W25X40BV SPI flash. The 512 KB image matches the 4 Mbit capacity of that Winbond chip. Write it with an SPI programmer such as a CH341A, either in-circuit or after removing the chip. Read and save the original contents first, and confirm the board is the Quanta LX6 revision before flashing to cure no-power or charging faults.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files