Full BIOS flash dump for the HP EliteBook 820 G1, a 16.0 MB raw binary. The name provides the model and generation only, without board number or version. Such an image is used to rewrite the SPI chip on a laptop that will not power on properly or stays on a black screen after a corrupted update. Use a hardware programmer, back up the existing contents first, and check that the flash capacity equals 16 MB; inspecting the file in a hex or UEFI editor beforehand is good practice.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfilebins. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →