Firmware archive for the HP EliteBook 820 G3 with the 6050A2892301-MB-A01 mainboard, revision A01. The 6050A part numbers identify an Inventec-designed board. The RAR file of about 10.9 MB holds an image meant for programming the SPI BIOS flash when the laptop shows no display, will not power on properly or is bricked after an update. Confirm the board code on the PCB before use, save a full read of the existing chip, and check the image length against the flash chip capacity to avoid a failed or partial write.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 10 Apr 2021 | Open file on RM Schematics |
| @BiosSchematicWorld | 13 Jan 2022 | Open file on RM Schematics |
| @pepeelectronica | 23 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 1 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →