Firmware set for the HP EliteBook Folio 1040 G3 on Quanta board DA0Y0FMBAJ1, with both a 16MB and an 8MB image and the Intel Management Engine region cleaned. The name says it is working. Many HP boards of this kind use two SPI chips, so each file goes to the chip of matching capacity. A clean ME region avoids errors after transplanting firmware. Read and back up both original chips first, then program each one with a hardware programmer and confirm the board number matches.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 27 Jul 2024 | Open file on RM Schematics |
| @generalbios | 4 Nov 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →