Firmware package for the HP EliteBook x360 1030 G2 on Inventec board 6050A2848001-MB-A01, from an i5-7600U configuration, with dumps for chips U366 and U365. These designators identify the two SPI flash positions on the board, so each image belongs to its own location. Write them with an SPI programmer after backing up the existing contents, and verify the chip sizes match the files. Inventec uses the 6050A number style for HP notebooks; check the PCB label and CPU fitted before flashing, as the dumps are model-specific.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 1 Aug 2024 | Open file on RM Schematics |
| @generalbios | 4 Nov 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →