BIOS dump for the HP EliteDesk 705 G1 in microtower form, intended for an 8 MB SPI flash chip and supplied as a ZIP of roughly 3.1 MB. A desktop image like this is used when the system fails to boot after a bad update or the flash contents are corrupt. Write it with a programmer such as a CH341A after reading and saving the original chip, since HP stores serial and board data in the flash. Check that the extracted image is exactly 8 MB to match the chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 2 Nov 2022 | Open file on RM Schematics |
| @Laptopbiossolutions | 20 Sept 2023 | Open file on RM Schematics |
How to open a .zip file
Compressed archive that every operating system opens without extra software.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →