BIOS package for the HP EliteDesk 800 G2 in the small form factor (SFF) chassis, with the name stating it was tested and working. The 11.1 MB RAR may hold one or more images, possibly for more than one flash chip, so inspect the contents before programming. A known-good dump is handy for recovering a bricked or corrupted board on the bench. Always read and keep the original firmware first, since it carries serial and system data, and make sure each image matches the capacity of the chip it is meant for.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Oct 2021 | Open file on RM Schematics |
| @BiosSchematicWorld | 19 Dec 2021 | Open file on RM Schematics |
| @pepeelectronica | 23 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 1 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →