BIOS archive for the HP EliteDesk 800 G3 in small form factor, stated to be a working, fully tested dump and sized at 16.1 MB. Business desktops of this kind store BIOS and system data on SPI flash, and a clean image is used to restore boards stuck without display or with corrupted firmware. Flash it with an external programmer, but first read the original chip, since serial number and product identity are stored there. Check that the chip capacity matches the image and that the board is the SFF version.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 29 May 2023 | Open file on RM Schematics |
| @generalbios | 4 Nov 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →