hp envy-4-1000sg(qau30-la8662p)bios3 rip

BIOS .bin 256 KB Shared

BIOS image for the HP Envy 4-1000sg, built on the Compal board LA-8662P with project code QAU30, 256 KB in BIN format. The name marks it as bios3 and a rip, meaning a portion extracted from a larger update or dump rather than a full chip image. Compal boards use LA-xxxxP numbers paired with a project code such as QAU30. Because 256 KB is far smaller than a typical BIOS chip, confirm which flash region or chip it targets before programming, and back up the original first.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptop. Enginerys does not host this file.

All sources (2)

The same file was posted more than once. If one link is dead, try the next.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files