hp envy touchsmart m6 VGU00 LA-9315P REV 1.0

BIOS .bin 8.00 MB Shared

Second copy of the firmware for the HP Envy TouchSmart m6 on the Compal VGU00 platform, board LA-9315P revision 1.0. The 8.00 MB raw binary is sized for a 64 Mbit SPI chip and is programmed with a CH341A, RT809 or similar tool. Compare the two copies first to make sure neither is damaged. Check the board label and revision against the PCB, and save the original chip contents so unit-specific data can be restored after flashing.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfilebins. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files