BIOS dump for an HP laptop on board LA-H325P revision 1.0, with FPW50 as the platform code. The LA-xxxxP format is Compal numbering, the ODM that built this motherboard. The image is 8.00 MB, which fits a 64 Mbit SPI flash. Check that the board number and revision printed on the PCB match before programming. Back up the original chip with a programmer, then write and verify; restoring a known-good image can fix no-boot or corrupted firmware faults.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosdumpcomputer. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →