Binary dump from an HP G42-352TU with an Intel Core i3, marked as the power image. The 512 KB size points to a small separate flash chip, most likely the one holding keyboard or embedded controller code that manages power-on sequencing, though the name does not confirm this. It pairs with the larger display BIOS file for the same model. Use it when a board shows no power response after a corrupted chip, and compare the chip marking and capacity on your board before flashing, keeping a backup of the original.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptop. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →