SPI flash dump for the HP G62-367DX, an AMD-based model on Quanta board DAOAX2MB6E1, revision E. The file is a 2.00 MB raw binary that can be written with a CH341A or similar programmer after removing or clipping onto the BIOS chip. The DA-style number follows the Quanta scheme, where the O in the name is usually read as zero on the PCB label. Compare the revision on the board itself, save the factory image first, and ensure the flash chip capacity matches before programming to avoid a failed write.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →