BIOS image for an HP desktop board identified as H-POPEYE-H61-uATX, version 2.10, described as good and working, as an 8 MB raw BIN file. The name points to an Intel H61 chipset micro-ATX board. An 8 MB file normally corresponds to a 64 Mbit SPI flash chip, which is written with a programmer such as a CH341A when the board fails to POST due to corrupt firmware. Back up the original chip before flashing, verify the chip capacity is 8 MB, and check the board label matches the POPEYE H61 designation.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bioshub. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →