HP laptop firmware set for model HSTNN-Q72C on the Quanta-made DAR18DMB6D0 board, revision D, described as a fully working BIOS plus EC pair with a 4 MB BIOS image. Technicians use such a pack to recover a board with corrupted firmware, a no-boot or no-power condition caused by a bad EC, by flashing the SPI chip with a CH341A or similar programmer. Make sure your chip is 4 MB so the dump fits, verify the PCB revision matches, and keep a backup of the original contents before erasing anything.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 3 Sept 2022 | Open file on RM Schematics |
| @Laptopbiossolutions | 20 Sept 2023 | Open file on RM Schematics |
| @Laptopbiossolutions | 20 Sept 2023 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →