Firmware archive for an HP M6 laptop on the VPU11 platform, built on the Compal LA-9851P board, revision 1.0. At 2.41 MB, the RAR likely contains the SPI BIOS image needed to revive the board after corruption. The Compal LA-prefixed number, printed on the PCB near the edge, is what to match rather than the retail model name. Program the chip with an external SPI programmer, read and save the existing contents before erasing, and check the image size against the flash capacity to avoid a failed write.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (6)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 7 Sept 2020 | Open file on RM Schematics |
| @biosarchive | 7 Sept 2020 | Open file on RM Schematics |
| @biositechyangiyer | 10 Sept 2020 | Open file on RM Schematics |
| @biositechyangiyer | 22 Sept 2020 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →