Firmware dump for the HP ProBook 430 G3 using the Quanta X61 motherboard, board number DA0X61MB6G0, revision G, read from a GigaDevice GD25B128CSIG flash chip, in a 5.20 MB ZIP. The GD25B128 is a 128 Mbit, 16 MB SPI chip, so the extracted image should match that capacity. Quanta's DA0 numbering identifies it as the ODM. Use a programmer to write the image when the laptop will not start, after reading and saving the original chip, and confirm the revision on the PCB.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (9)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 24 Apr 2018 | Open file on RM Schematics |
| @abgm_manutencao_bios | 17 Feb 2021 | Open file on RM Schematics |
| @biosarchive | 27 Apr 2021 | Open file on RM Schematics |
| @BiosSchematicWorld | 19 Dec 2021 | Open file on RM Schematics |
| @pepeelectronica | 23 Apr 2022 | Open file on RM Schematics |
| @generalbios | 8 Oct 2023 | Open file on RM Schematics |
| @schematiclaptopramkushwaha | 13 Jul 2025 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 1 Aug 2026 | Open file on RM Schematics |
How to open a .zip file
Compressed archive that every operating system opens without extra software.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →