EC firmware image of 32 MB for the HP ProBook 440 14 inch G10, supplied as a raw BIN file. On these HP boards the embedded controller uses its own flash, and a corrupted EC image can cause no power, no charging or keyboard faults. Flash it with an SPI programmer such as a CH341A after reading and saving the existing chip. Check that the image size matches the target chip capacity and that the board is a 440 G10, since EC code is not shared across models.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosdumpcomputer. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →