HP Probook 440 G2 450 G2 ZPL40-ZPL50-ZPL70 LA-B181P Rev 1.0

BIOS .bin 8.00 MB Shared

BIOS dump for the HP ProBook 440 G2 and 450 G2 on a Compal LA-B181P Rev 1.0 motherboard, with the ZPL40, ZPL50 and ZPL70 board codes listed in the name. The image is 8 MB, matching a 64 Mbit SPI flash chip. Technicians write such a dump with an SPI programmer to recover a board with corrupted firmware or a failed update. Compal LA-xxxxP numbers are printed on the PCB, so confirm the number and revision match, and back up the existing chip, which holds unit-specific data such as serial and UUID.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfilebins. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files