Working firmware image for the HP ProBook 440 G5 laptop built on Quanta motherboard DA0X8BMB6F0, with the Intel ME region cleared. The 18.9 MB RAR may contain more than one dump or supporting files, so check the contents and pick the image that matches your SPI chip capacity. Use it to revive a board stuck on a black screen or failing after a bad update by programming the flash externally. Read and keep the original chip first to preserve the serial number and SKU data, and confirm the board number on the PCB.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (7)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 9 Sept 2023 | Open file on RM Schematics |
| @Laptopbiossolutions | 19 Sept 2023 | Open file on RM Schematics |
| @generalbios | 12 Oct 2023 | Open file on RM Schematics |
| @generalbios | 15 Oct 2023 | Open file on RM Schematics |
| @generalbios | 19 Oct 2023 | Open file on RM Schematics |
| @generalbios | 26 Oct 2023 | Open file on RM Schematics |
| @generalbios | 29 Oct 2023 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →