Main-board BIOS image for an HP ProBook 440, written as GO, probably the G0 generation, and labelled with the board code name Fiji. The 8 MB file corresponds to a 64 Mbit SPI flash. It can be used to reprogram a corrupted chip on a unit that powers on without display or fails to boot. The name gives no numeric board number, so check the PCB markings, back up the existing chip with a programmer, and confirm image and chip sizes match before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptop. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →