Firmware image for the HP ProBook 450 G0, built on the Wistron FiJi platform with motherboard 12238-1, also identified by the part number 48.4YZ31.001. The dump is 8 MB, the size of a 64 Mbit SPI flash device. Wistron boards carry a 48.4xxxx.xxx code and an MB number on the PCB, and both should be compared with the board before flashing. Use it with an external programmer to revive a board stuck on a black screen from corrupt BIOS, and keep a backup of the original chip's contents.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfilebins. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →