Original BIOS read from an HP ProBook 450, marked org and with the model given as GO, probably the G0 generation. At 8 MB it suits a 64 Mbit SPI flash. An original dump is useful as a reference image or for restoring a board after a failed update, though it carries the donor machine's serial and system data. The name gives no board number, so check the PCB marking first. Always back up the chip in place before programming and verify the write afterward.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptop. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →