BIOS dump intended for the HP ProBook 4510 on Inventec mainboard 6050A2252601-MB-A04, revision A04. At 2.00 MB it matches a 16 Mbit SPI flash and is written byte for byte with a programmer such as a CH341A or RT809 when the system is bricked. The 6050A prefix is the Inventec board numbering style, so check the number and revision printed on the PCB before use. Back up the existing chip image to preserve serial numbers and product data that may differ from this copy.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →