Working BIOS dump for the HP ProBook 640 G3 laptop, built on the CLOONEY motherboard with board number 6050A28601101, revision MB A01, and marked as fully working. The 6050A prefix follows the Inventec numbering pattern, so the number on the PCB silkscreen should match before flashing. Such a dump is used to recover a dead or locked board by programming the SPI chip directly. Keep a backup of the original chip, since it holds the serial number and system data that a donor image will not carry, and check the image size against the chip capacity.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 28 Aug 2024 | Open file on RM Schematics |
| @generalbios | 5 Nov 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →