Raw 8 MB BIOS image for the HP ProBook 6560b, read from a Winbond W25Q64 SPI flash chip, the 64 Mbit part whose capacity matches the file size. The name also carries a date of 2016-12-10 and the number 33951, likely a dump identifier. A .bin of this kind is written directly to the chip with a programmer such as a CH341A or RT809. Before flashing, back up the original chip, since it holds board-specific data like serial and MAC, and verify the chip on your board is the same capacity.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →