Backup BIOS image from an HP ProBook built on Quanta board DA0SX7MB6D0 revision E, labelled as taken from a unit with a no display fault. Because of that label, treat it as a reference read rather than a confirmed good image, since corrupted firmware may be the cause of the symptom. The 2.00 MB binary fits a 16 Mbit SPI chip. Compare it against a known working dump where possible, keep your own chip backup, and confirm the board revision before programming it.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @zinfoservicebios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →