Firmware dump for the HP ProBook x360 11 G4 EE, project BALCOS 20, board 6050A3018901 revision A01, read from a Winbond W25Q128BV flash chip (16 MB). The board number follows the Inventec 6050A scheme. Write it back with an SPI programmer set to the W25Q128 family after saving the existing contents. Check the board number and A01 revision on the PCB first, and keep in mind that HP stores serial and system data in the image.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →