Firmware dump for the HP ProDesk 400 G4 MT desktop, sized for a 16 MB flash chip and tied to the CRUX board at revision A. The 5.48 MB RAR should contain an image that is flashed with an SPI programmer such as a CH341A when the system will not boot or the BIOS is damaged. Confirm the chip is indeed 16 MB, since a mismatched size will not fit, and keep a backup of the original contents, which carry the unit's serial and product data that a generic dump will replace.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →