BIOS image for the HP ProDesk 600 G1 small form factor desktop, supplied as a 16 MB raw binary that the name describes as working. A 16 MB file matches a 128 Mbit SPI flash chip, so check the chip marking on the board before programming. Technicians use dumps like this to recover a desktop that will not POST after a failed update or a corrupted BIOS. Read and keep the original chip contents first, because they may hold the serial number, product data and the system's MAC address.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @CLRINDORE. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →