BIOS dump for the HP ProDesk 600 G2 small form factor desktop, board code name Spitfire, revision A, marked as fully working. The RAR archive of 7.84 MB holds the firmware image intended for writing straight to the motherboard SPI flash with a hardware programmer such as a CH341A when the machine no longer posts or the BIOS is corrupted. Before flashing, read and save the original chip contents, since they carry the serial number and system data, and make sure the image size matches the capacity of the installed flash chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (6)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 10 Sept 2023 | Open file on RM Schematics |
| @generalbios | 12 Oct 2023 | Open file on RM Schematics |
| @generalbios | 15 Oct 2023 | Open file on RM Schematics |
| @generalbios | 19 Oct 2023 | Open file on RM Schematics |
| @generalbios | 26 Oct 2023 | Open file on RM Schematics |
| @generalbios | 29 Oct 2023 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →