HP Z4 G4 Workstation IDS Base Model SN CZC9118PQ7 16MB Tasted BY

BIOS .bin 16.0 MB Shared

Tested BIOS image for the HP Z4 G4 Workstation, IDS base model, taken from a unit with serial CZC9118PQ7, sized 16 MB. Because it comes from a specific machine, it may contain that unit's serial and identifiers, which may need correcting for your workstation. The 16 MB size suits a 128 Mbit SPI flash chip. Desktop boards are usually flashed with a clip-on programmer. Read and save the original chip before writing so the genuine serial and product data can be restored.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files