Firmware dump for the HP ZBook Studio G3 mobile workstation, built on Compal board LA-C401P revision 2C, and marked ok in the name, which suggests it was tested as working. The 7.85 MB RAR archive should hold an SPI flash image for writing with a hardware programmer such as a CH341A or RT809. Read and keep a backup of the original chip before writing, since serial number and other unit-specific data live there. Also confirm that the image size fits the installed flash device.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 29 Aug 2023 | Open file on RM Schematics |
| @Laptopbiossolutions | 19 Sept 2023 | Open file on RM Schematics |
| @generalbios | 12 Oct 2023 | Open file on RM Schematics |
| @generalbios | 15 Oct 2023 | Open file on RM Schematics |
| @generalbios | 19 Oct 2023 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →