Firmware for the HP 15-ac122TU on Compal board LA-C701P revision 1.0, project codes AHL50 and ABL52, with an MX25L6405 flash chip named. The MX25L6405 is a Macronix 64 Mbit (8 MB) SPI part, so the image should match that capacity. Compal uses the LA- pattern printed on the PCB. Write it with an external programmer to recover a non-booting unit, but first read and save the existing chip, check the revision on the board, and confirm the chip marking matches.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 16 Jan 2018 | Open file on RM Schematics |
| @abgm_manutencao_bios | 8 Aug 2019 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →