HP290 G3 280 PRO G5 Miltone-b Rev A ok Cleanl me ++

BIOS .bin 16.0 MB Shared

Raw 16 MB BIOS binary for the HP 290 G3 and HP 280 Pro G5 desktops, board code Miltone-B, revision A. The name says it works and has a cleaned ME region. Because the image is a full 16 MB dump, it is meant for a 128 Mbit SPI flash and can be written directly with a programmer such as a CH341A or RT809. Read and keep the original chip first, since HP stores serial and product data in firmware. Make sure the board revision and the chip capacity match before writing, or the image will not fit.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @BiosSupport2006. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files