Firmware image for the HP 6730s, tied to motherboard number 6050A2161001, 2.00 MB in BIN format. The 6050A prefix belongs to the numbering used by Inventec boards, and the number is printed on the PCB silkscreen. A 2 MB dump fits a 16 Mbit SPI flash chip and is written with a programmer such as CH341A when the laptop has a corrupt BIOS. Read and keep the original contents before overwriting, and make sure the board number on your unit matches exactly, since HP used several boards in this range.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptop. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →