System ROM image for the HPE ProLiant ML10 Gen9 tower server, a 16 MB BIN file suited to a 128 Mbit SPI flash. Server boards often store configuration, serial numbers and other platform data in the same chip. Always read and archive the original contents with a programmer before writing this image. It can recover a server whose firmware is corrupted and that will not POST. Check the chip part number and capacity on the board, because an image that does not match the flash size cannot be written correctly.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @laptopdesktopbiosbin. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →