Firmware dump for the Huawei HG532e ADSL router, hardware version B, based on the Ralink RT63365E processor, and described as tested working. The 3.54 MB RAR is used to restore a router that is bricked or stuck in a boot loop, usually by writing the image to its SPI flash with a programmer or via serial recovery. Read and keep the original flash contents before writing anything, confirm the hardware version on the label or board matches Ver B, and check that the dump size fits the installed flash chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 11 May 2021 | Open file on RM Schematics |
| @bios_files_Request | 29 Mar 2023 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →